Style D Roof Edge
Phillips Style D Roof Edge is designed to protect and cover the exposed edge of the roof line. This product helps prevent water backup under the shingles and protects roofing from water damage along the entire eave. Available colors are white, brown, bronze, hot-dipped galvanized and black. Other colors may be available upon request; please ask your sales representative for more information. Hemmed edges. Download MSDS (Material Safety Data Sheet). Available in both 26 and 28 gauge.
| SIZES & PACKAGING |
| Style D Roof Edge |
| Length |
Pieces
Per
Carton |
Cartons
Per
Pallet |
Feet
Per
Carton |
| 10' |
25 |
35 |
250 |
| Length |
Pieces
Per
Bundle |
Bundles
Per
Pallet |
Feet
Per
Bundle |
| 10' |
10 |
100 |
250 |
UPC labeling available upon request |
 |
Back to Top
Roof Edge
Phillips Roof Edge is designed to protect and cover the exposed edge of the roof line. This product helps prevent water backup under the shingles and protects roofing from water damage along the entire eave. Available colors are white, brown, bronze, hot-dipped galvanized and black. Other colors may be available upon request; please ask your sales representative for more information. Variety of sizes available. Hemmed edges. Download MSDS (Material Safety Data Sheet). Available in both 26 and 28 gauge.
| SIZES & PACKAGING |
| Roof Edge |
| Length |
Pieces
Per
Carton |
Cartons
Per
Pallet |
Feet
Per
Carton |
| 10' |
25 |
35 |
250 |
| Length |
Pieces
Per
Bundle |
Bundles
Per
Pallet |
Feet
Per
Bundle |
| 10' |
10 |
100 |
100 |
UPC labeling available upon request |
 |
Back to Top
Gutter Apron (Open Angle)
Phillips Gutter Apron is used to direct water into the gutter system by directing rain water run-off to drip away from fascia. This product is installed over the roof edge and extends into the gutter. Phillips Gutter Apron is open angle or designed for roof edge angles greater than 90 degrees. Available colors are white, brown, bronze, hot-dipped galvanized and black. Other colors may be available upon request; please ask your sales representative for more information. Variety of sizes available. Hemmed edges. Download MSDS (Material Safety Data Sheet). Available in both 26 and 28 gauge.
| SIZES & PACKAGING |
| Gutter Apron |
| Length |
Pieces
Per
Carton |
Cartons
Per
Pallet |
Feet
Per
Carton |
| 10' |
25 |
35 |
250 |
| Length |
Pieces
Per
Bundle |
Bundles
Per
Pallet |
Feet
Per
Bundle |
| 10' |
10 |
100 |
100 |
UPC labeling available upon request |
 |
Back to Top
Eave Drip
Phillips Eave Drip is designed to direct water into the gutter system by directing rain water run-off to drip away from fascia. This product is installed over the roof edge and extends into the gutter.Available colors are white, brown, bronze, hot-dipped galvanized and black. Other colors may be available upon request; please ask your sales representative for more information. Hemmed edges. Download MSDS (Material Safety Data Sheet). Available in both 26 and 28 gauge.
| SIZES & PACKAGING |
| Eave Drip |
| Length |
Pieces
Per
Carton |
Cartons
Per
Pallet |
Feet
Per
Carton |
| 10' |
25 |
35 |
250 |
| Length |
Pieces
Per
Bundle |
Bundles
Per
Pallet |
Feet
Per
Bundle |
| 10' |
10 |
100 |
100 |
UPC labeling available upon request |
 |
Back to Top
W-Valley
Phillips W-Valley is used in the roof valley area to channel water down into the gutters. This product features a small ridge in the middle to prevent run-off rain from running down one side of the roof and splashing up under shingles on the opposing side. Available colors are white, brown, bronze, hot-dipped galvanized and black. 24" width shown; standard width of 18” and 20” also available. Other colors and sizes may be available upon request; ask your sales representative for details. This product features hemmed edges. Download MSDS (Material Safety Data Sheet). Standard packaging is 250 pieces per pallet.
| SIZES & PACKAGING |
| W Valley |
| Length |
Pieces
Per
Bundle |
Bundles
Per
Pallet |
| 10' |
10 |
25 |
UPC labeling available upon request |
 |
Back to Top
Step Flashing (Pre-Bent Flashing Shingles)
Phillips Step Flashing (Pre-Bent Flashing Shingle) is used on the side of a shingle when it meets a vertical termination such as a wall, chimney or other termination. The product helps prevent water from entering between the shingle and the termination. Step Flashing is pre-bent for easy installation. Available in a variety of sizes and colors (see color guide). Download MSDS (Material Safety Data Sheet).
Product Image Coming Soon!
Back to Top
Flat Flashing Shingles
Phillilps Flat Flashing Shingles are utility roofing metal products used in a variety of flashing applications. This product can be bent on the job to fit custom or fill in flashing requirements. Flat Flashing Shingles are available in a variety of sizes and colors (see color guide). Download MSDS (Material Safety Data Sheet).
Product Image Coming Soon!
Back to Top
Wall Flashing
Wall flashing is designed to prevent the entry of water into the wall. Wall flashing is typically found at interruptions in the wall, such as windows and points of structural support. This product works great to prevent top edge of window or door openings from water infiltration. Wall flashing is available in regular (for 90° angles) and open angle. Available in a variety of sizes and colors (see color guide). Download MSDS (Material Safety Data Sheet).
Product Image Coming Soon!
Back to Top
Roll Flashing
Phillips Roll Flashing is used for custom flashing and do-it-yourself projects. This product adds a customized look to any dormer or flashing piece. Available colors are white, brown, bronze, hot-dipped galvanized and black. Other colors may be available upon request; please ask your sales representative for more information. Up to 24" width available. 10', 25', and 50' length rolls. Download MSDS (Material Safety Data Sheet).
Back to Top
