SLOK (3/4" Bullnose)

Phillips kwikSTIK^® 3/4" SLOK bullnose corner bead provides a smooth, rounded finish to outside 90° corners. This product features appoximately 20% thicker steel than ASTM standard C1047 minimum requirement for a strong, durable corner. Specially engineered paper provides superior mud and paint adhesion on all of Phillips paper faced products. Download Submittal and/or MSDS (Material Safety Data Sheet). For additional technical information, please visit the Technical Specifications section.

SIZES & PACKAGING SLOK (PBT) Length Pieces Per Carton Cartons Per Pallet Feet Per Carton 8' 50 56 400 9' 50 56 450 10' 50 56 500 UPC labeling available upon request

Back to Top
 

SLOK-OS (3/4" Bullnose Splay)

Phillips kwikSTIK^® 3/4" SLOK-OS bullnose splay corner bead works great to provide a smooth, rounded finish to open angle corners exceeding 120°. This product features approximately 20% thicker steel than ASTM standard C1047 minimum requirement for a strong, durable corner. This product is tape-on meaning no fasteners or nails are needed to installation. Specially engineered paper provides superior mud and paint adhesion on all Phillips paper faced products. Download Submittal and/or MSDS (Material Safety Data Sheet). For additional technical information, please visit the Technical Specifications section.

SIZES & PACKAGING SLOK-OS (PAT) Length Pieces Per Carton Cartons Per Pallet Feet Per Carton 8' 50 56 400 9' 50 56 450 10' 50 56 500 UPC labeling available upon request

Back to Top
 

1-1/2" Bullnose

Phillips kwikSTIK^® 1-1/2" Bullnose corner bead works great to provide a more pronounced round finish to outside 90° corners. This product is also available in splay. This product is tape-on meaning no fasteners or nails are needed for installation. This product features approximately 20% thicker steel than ASTM standard C1047 minimum requirement for a strong, durable corner. Specially engineered paper provides superior mud and paint adhesion. Download Submittal and/or MSDS (Material Safety Data Sheet). For additional technical information, please visit the Technical Specifications section.

SIZES & PACKAGING 1-1/2" Bullnose (PHT) Length Pieces Per Carton Cartons Per Pallet Feet Per Carton 8' 25 56 200 9' 25 56 225 10' 25 56 250 UPC labeling available upon request

Back to Top
 

1-1/2" Bullnose Splay

Phillips kwikSTIK^® 1-1/2" Bullnose Splay is designed to professionally finish outside open angle corners. This product works great to provide a very smooth and rounded finish to outside corners exceeding 120°. This product is tape-on meaning no fasteners or nails are needed to installation. This product features approximately 20% thicker steel than ASTM standard C1047 minimum requirement for a strong, durable corner. Specially engineered paper provides superior mud and paint adhesion on all Phillips paper faced products. Download Submittal and/or MSDS (Material Safety Data Sheet). For additional technical information, please visit the Technical Specifications section.

SIZES & PACKAGING 1-1/2" Bullnose Splay (PJT) Length Pieces Per Carton Cartons Per Pallet Feet Per Carton 8' 25 56 200 9' 25 56 225 10' 25 56 250 UPC labeling available upon request

Back to Top
 

3/4" Southwestern Bullnose

Phillips kwikSTIK^® 3/4" Southwestern Bullnose corner bead is an economical bead providing a round, smooth appearance to 90° outside corners. This product features a lighter gauge steel which does not meet ASTM standard C1047; however, this product meets all other ASTM standards. No fasteners or nails are needed for installation and specially engineered paper provides superior mud and paint adhesion. Download Submittal and/or MSDS (Material Safety Data Sheet). For additional technical information, please visit the Technical Specifications section.

SIZES & PACKAGING 3/4" Southwestern Bullnose (PST) Length Pieces Per Carton Cartons Per Pallet Feet Per Carton 8' 50 56 400 9' 50 56 450 10' 50 56 500 UPC labeling available upon request

Back to Top