Home Products Catalogs Contact Us

Home

About Us

Products

Tech Specs

Architect Center

Steel & Vinyl Purchasing

News

Employment

Contact Us

 

Download Packaging Sheet

Metal Lath
 
Engineered to Perform

Phillips Metal Lath Features:

  • All Diamond Mesh, Self Furring Diamond Mesh and V-Groove Lath Now Available in Paper Back
  • New Lath Products include High Rib and V-Groove
  • Manufactured to specified weight with hot-dipped galvanized steel
  • Use with complete confidence in all applications
 

Flat Diamond Mesh Lath

Phillips Flat Diamond Mesh Lath is used as a plaster base and reinforcement on almost all types of walls and ceilings, over wood or steel framing, flat or curved surfaces. The large number of openings provide for better stucco bonding in both pumped and troweled applications. This product is widely used as a reinforcement for base coat in ceramic tile work. This product is manufactured to specified weight with hot-dipped galvanized steel and can be used with complete confidence in all applications. Available in 1.75 (175GLHDG8), 2.5 (25GLHDG8) and 3.4 (34GLHDG8). Available in Paper Back (add PB1-2 to part number). Download Submittal and/or MSDS (Material Safety Data Sheet). For additional technical information, please visit the Technical Specifications section.

Diamond Mesh Lath

 
SIZES & PACKAGING
Flat Diamond Mesh Lath
Std. Wt./
Sq. Yd.
Sheet
Size
Pieces
per
Bundle
Bundles
per
Pallet
Sq. Yds.
per
Bundle
1.75 27" x 97" 10 25 20
2.50 27" x 97" 10 25 20
3.40 27" x 97" 10 25 20

UPC labeling available upon request

 

Back to Top
 

Self-Furring Dimpled Diamond Mesh Lath

Phillips Self-Furring Dimpled Diamond Mesh Lath is used extensively in stucco work as plaster reinforcement over interior masonry walls as well as in steel column fireproofing. It is also widely used as a reinforcement for base coat in ceramic tile work.  Self-Furring Dimpled Diamond Mesh Lath is used over solid surfaces like concrete, cement board, column fireproofing, masonry and replastering over old surfaces. The self-furring dimples hold the metal lath 1/4" away from the surface to be plastered. The dimpled raised lath substrate provides superior mechanical bond over solid surfaces.  This product is easily shaped for curved or contoured surfaces.  The self-furring nature of the product helps applicators maintain plaster depths.   This product features a hot-dipped galvanized finish.  To maintain the designed furring characteristics, fasteners must be applied within the dimple cavity. Available in 1.75 (175SLHDG8), 2.5 (25SLHDG8) and 3.4 (34SLHDG8). Available in Paper Back (add PB1-2 to part number). Download Submittal and/or MSDS (Material Safety Data Sheet). For additional technical information, please visit the Technical Specifications section.

Self-Furring Diamond Mesh Lath

 
SIZES & PACKAGING
Self-Furring Dimpled Diamond Mesh Lath
Std. Wt./
Sq. Yd.
Sheet
Size
Pieces
per
Bundle
Bundles
per
Pallet
Sq. Yds.
per
Bundle
1.75 27" x 97" 10 25 20
2.50 27" x 97" 10 25 20
3.40 27" x 97" 10 25 20

UPC labeling available upon request

 

Back to Top
 

High Rib Lath

Phillips High Rib Lath is intended for horizontal applications with its seven longitudinal ribs, each 3/8” deep and eight small flat ribs to provide additional rigidity. High Rib Lath is the most rigid of all laths and provides the added support required when framing is more than 16”O.C. but does not exceed 24” O.C. It is commonly used for soffits and ceilings under steel or wood joist construction & metal-reinforced concrete floors.

3/8” High Rib Lath has a herringbone mesh pattern with 3/8” V-shaped ribs running the length of the sheet at 4 ½” intervals and inverted 3/16” intermediate ribs. The rib is placed against the framing member and does not require a minimum 1” three-coat system. This lath can be used for stud less no-load-bearing partitions by wire tying lath back to back with ribs running perpendicular to each other. Plaster can then be applied to form a wall 2” thick. Available in 3.4 (34RLHDG8). Submittal, MSDS and Technical Specifications coming soon.

metal lath high rib

 
SIZES & PACKAGING
Diamond Mesh Lath
Std. Wt./
Sq. Yd.
Sheet
Size
Pieces
per
Bundle
Bundles
per
Pallet
Sq. Yds.
per
Bundle
3.40 27" x 97" 10 50 20

UPC labeling available upon request

 

Back to Top

Self-Furring V-Groove Diamond Mesh Lath

Phillips Self-Furring V-Groove Diamond Mesh Lath is manufactured with approximately ¼” deep grooves and 5 grooves per sheet. This product is used over surfaces like concrete, cement board, column fireproofing, masonry and replastering over old surfaces. V-Grooves ensure thorough plaster penetration and strong mechanical bond. V-Groove Lath is easily shaped for curved or contoured surface, maintains consistent plaster depths and eliminates need for added furring strips. To maintain the designed V-groove furring characteristics, fasteners must be applied within the V-cavity. Available in 2.5 (25SLHDG8VG) and 3.4 (34SLHDG8VG). Available in Paper Back (add PB1-2 to part number). Submittal, MSDS and Technical Specifications coming soon.

metal lath v groove

 
SIZES & PACKAGING
Self-Furring V-Groove Diamond Mesh Lath
Std. Wt./
Sq. Yd.
Sheet
Size
Pieces
per
Bundle
Bundles
per
Pallet
Sq. Yds.
per
Bundle
2.50 27" x 97" 10 25 20
3.40 27" x 97" 10 25 20

UPC labeling available upon request

 

Back to Top

 

 
Product Lines

Metal Beads & Trims

Vinyl Beads & Trims

Flexible Corner Trim

Papaer Faced Beads & Trims

Metal Channels

Structural Framing

I Studs

Stoucco, Veneer, Plaster Trims

Metal Lath

Roofing Metals

 

Download Packaging Sheet