Conventional Metal Studs
Phillips conventional metal studs are "C" shaped metal studs fabricated from galvanized steel.
The standard widths for drywall metal studs are 1-5/8" (162S125), 2-1/2" (250S125), 3-5/8" (362S125), 4" (400S125), and 6" (600S125). Standard lengths are 10', 12' and 14'. Other lengths available upon request. Conventional metal studs are available in 25, 22, 20, 18, and 16 gauge steel for your convenience (1-5/8" available in 20, 22 and 25 gauge only). To view packaging of Phillips Conventional Metal Studs, please download the Packaging Sheet. Structural studs are also available.
Part Number: See Text
|
 |
Back to Top
Conventional Metal Tracks
Phillips conventional metal tracks are fastened at the floor and ceiling to support the steel studs. Metal tracks are channel shaped and fabricated from galvanized steel. Phillips offers conventional tracks in 25, 22, 20, 18, and 16 gauge steel (1-5/8" available in 20, 22 and 25 gauge only). Hemmed track is available in 25 gauge steel .
The standard widths for metal tracks are 1-5/8" (162T125), 2-1/2" (250T125), 3-5/8" (362T125), 4" (400T125), and 6" (600T125). The standard length is 10’; however, other lengths may be available upon request. To view packaging of Phillips Metal Tracks, please download the Packaging Sheet.
Part Number: See Text
|
 |
Back to Top
ViperStud®
Phillips ViperStud® Drywall Framing System offers all the benefits of conventional flat steel studs with a design that utilizes a lighter steel. ViperStud® features a knurled flange and reinforcing ribs along with a flat stud design. Knurling is the pattern of small ridges formed on the flange to prevent screws from walking. Since knurling is only formed on one side of the steel, the stud stays flat, never compromising the strength or thickness of the steel. ViperRib® technology applies a reinforced ribbing over the web and flange of ViperStud®. The ribs provide added strength, are less prone to twist and creating "high-shoulders" when finishing gypsum board. Since ViperStud® is flat steel, it is easy to plumb and mark, make minor adjustments and use laser levels. This makes installation the same as conventional studs and is interchangeable with conventional framing components. No extra training or special fasteners are required for installation. Available in both 25 EQ and 20 EQ gauge steel. The standard widths for drywall metal studs are 1-5/8" (162VS125), 2-1/2" (250VS125), 3-5/8" (362VS125), 4" (400VS125) and 6" (600VS125). Standard lengths are 10', 12', 14', and 16'. Download the ViperStud® Drywall Framing System Product Catalog. View the ICC-ES evaluation report.
|
 |
The ViperStud® Logo, "ViperStud®", "ViperTrack®", and "ViperRib®" are registered trademarks of Ware Industries Inc. and are used by Phillips Manufacturing Co. under license from Ware Industries Inc.
Back to Top
ViperTrack®
Phillips ViperTrack® is fastened at the floor and ceiling to support the steel studs. ViperTrack® features a knurled flange, which is the pattern of small ridges formed on the flange, to prevent screws from walking, without compromising the strength or thickness of the steel. ViperTrack® is fabricated from galvanized steel. ViperTrack25 has been extensively tested with Viper25 and Viper20 studs proving it is not necessary to use the same thickness track as stud. You can now submit a lighter gauge track with your Viper20 studs and reduce your cost. ViperTrack® is available in both 25 EQ and 20 EQ gauge steel. Hemmed track is available in 25 EQ gauge steel. The standard widths for metal tracks are 1-5/8" (16VT125), 2-1/2" (250VT125), 3-5/8" (362VT125), 4" (400VT125) and 6" (600VT125). Standard length is 10'. Download the ViperStud® Drywall Framing System Product Catalog. View the ICC-ES evaluation report.
|
 |
The ViperStud® Logo, "ViperStud®", "ViperTrack®", and "ViperRib®" are registered trademarks of Ware Industries Inc. and are used by Phillips Manufacturing Co. under license from Ware Industries Inc.
Back to Top
