Hemmed H-Stud
Phillips Hemmed H-Stud is a key framing component and adds structural integrity to area separation wall assemblies. This product features 2" wide vertical members which are inserted into the U-Track for framing solid partition separation walls. This product is manufactured to length for your convenience. Phillips Hemmed H-Stud follows nationally recognized evaluation service ICC ES, Inc. Legacy Report 90-26.01.
To view addtional packaging information for Phillips H-Stud, please download the Packaging Sheet. Download Submittal and/or MSDS (Material Safety Data Sheet). For additional technical information, please visit the Technical Specifications section and for Fire-Resistance Rating information, please visit the Fire-Ratings section.
| SIZES & PACKAGING |
| H-Stud |
| Length |
Pieces
Per
Bundle
|
Bundles
Per
Pallet |
Feet
Per
Bundle
|
| 8' |
10 |
55 |
80 |
| 10' |
10 |
55 |
100 |
| 12' |
10 |
55 |
120 |
UPC labeling available upon request |
 |
Back to Top
U-Track
Phillips U-Track is used at the top and bottom of vertical panels to secure shaftliner panels and H-studs in area separation wall assemblies. U-Track is fastened at the floor and ceiling to support the H-Studs. This product has a 2" width. To view additional packaging information for Phillips U-Track, please download the Packaging Sheet. Download Submittal and/or MSDS (Material Safety Data Sheet). For additional technical information, please visit the Technical Specifications section and for Fire-Resistance Rating information, please visit the Fire-Ratings section.
| SIZES & PACKAGING |
| U-Track |
| Length |
Pieces
Per
Bundle |
Bundles
Per
Pallet |
Feet
Per
Bundle |
| 10' |
10 |
54 |
100 |
|
 |
ASW I-Stud
Phillips ASW I-Studs are a cost effective alternative to a shaftwall system in non-specified applications. For cavity shaftwall systems please see Phillips I-Studs under our Shaftwall/Stairwell division. ASW I-Studs are an easy to assemble fire rated assembly in non-load bearing applications. This product features a 2-1/2" width and is manufactured from 25 gauge galvanized steel. To view addtional packaging information for Phillips ASW I-Stud, please download the Packaging Sheet.
| SIZES & PACKAGING |
| ASW I-Stud |
| Length |
Pieces
Per
Bundle |
Bundles
Per
Pallet |
Feet
Per
Bundle |
| 8' |
10 |
50 |
80 |
| 10' |
10 |
50 |
100 |
| 12' |
10 |
50 |
120 |
UPC labeling available upon request |
 |
Back to Top
ASW Clips
Phillips ASW clips are attached to the wood or steel framing at vertical steel framing stud/wood framing intersection. ASW clips are 2" wide with 2" x 2-1/2" legs. Packaging is 500 pieces per carton. Download Submittal and/or MSDS (Material Safety Data Sheet). For additional technical information, please visit the Technical Specifications section and for Fire-Resistance Rating information, please visit the Fire-Ratings section.
Back to Top
